Updated Pinouts for the Konekt Dash and Dash Pro

/ Written By Daniel D Lindmark

We’ve updated the pinouts for the Konekt Dash and Dash Pro. We’ve had to make some changes to the boards. If you have any questions, head over to our Community Forum.

Konekt-Dash-Pro-Pinout Konekt-Dash-Regular-Pinout

 

 

Note: We are including this legacy pinout for our beta users. This is the pinout for the Dash Pro Beta. The pinouts will change to those listed above.

Konekt-Dash-Pro-Pinout-LEGACY_correct

 

Edit: Replaced the Dash Pro Legacy pinout with correct legacy pinout.

Update 2015-11-09:

  • Konekt Dash Pro
    • Right.13 from M1.51 to M1.34 (?35)
    • Right.14 from M1.52 to M1.16
    • Right.11 from M1.54 to —
    • Left.8 UART from — to UART2_TX
    • Left.8 I2C from — to I2C0_SDA
    • Left.7 UART from UART2_TX to UART0_CTS
    • Left.6 UART from UART0_CTS to UART2_RX
    • Left.6 I2C from — to I2C0_SCL
    • Left.5 ADC/DAC from — to ADC0_SE5B
    • Left.5 UART from UART2_RX to UART2_CTS
  • Konekt Dash
    • Left.17 from U30 to U.24
    • Left.16 from U31 to U.25
    • Left.15 from U29 to U.23
    • Left.3 M1 from — to 1
    • Left.4 M1 from — to 2
    • Left.5 M1 from 1 to 58
    • Left.6 M1 from 2 to 59
    • Left.7 M1 from 58 to 62
    • Left.8 M1 from 59 to 60
    • Left.9 M1 from 62 to 36
    • Left.10 M1 from 60 to 27
    • Left.11 M1 from 36 to 28
    • Left.12 M1 from 27 to 29
    • Left.13 M1 from 28 to 35
    • Left.14 M1 from 29 to 18
    • Left.8 UART from — to UART2_TX
    • Left.8 I2C from — to I2C0_SDA
    • Left.7 UART from UART2_TX to UART0_CTS
    • Left.6 UART from UART0_CTS to UART2_RX
    • Left.6 I2C from — to I2C0_SCL
    • Left.5 ADC/DAC from — to ADC0_SE5B
    • Left.5 UART from UART2_RX to UART2_CTS